Standard Cup

Made of solid bar stock, AmeriKen Cup Punches are used primarily for score cutting. The cup punch is generally used for diecutting materials with a thickness of less than .015, however, it can be used for cutting thicker compressible materials, where removal of the slug is not critical. Because the cup punch is a solid punch it is very strong and will perform effectively for extended production operations without damage.

 

Bevel Base Size Cut Edge Stock # Bevel Base Size Cut Edge Stock #
CB 1/16 1/32 K-601 OB 5/16 3/16 K-620
IB 1/16 .052 K-602 OB 5/16 7/32 K-621
CB 3/32 5/64 K-603 CB 5/16 1/4 K-622
IB 3/32 .084 K-604 IB 5/16 9/32 K-623
OB 1/8 3/64 K-605 IB 5/16 19/64 K-624
OB 1/8 5/64 K-606 OB 3/8 1/4 K-625
CB 1/8 1/16 K-607 OB 3/8 9/32 K-626
IB 1/8 3/32 K-608 CB 3/8 5/16 K-627
IB 1/8 7/64 K-609 IB 3/8 11/32 K-628
OB 3/16 1/16 K-610 IB 3/8 23/64 K-629
OB 3/16 3/32 K-611 OB 7/16 5/16 K-630
CB 3/16 1/8 K-612 OB 7/16 11/32 K-631
IB 3/16 5/32 K-613 CB 7/16 3/8 K-632
IB 3/16 11/64 K-614 IB 7/16 13/32 K-633
OB 1/4 1/8 K-615 IB 7/16 27/64 K-634
OB 1/4 5/32 K-616 OB 1/2 3/8 K-635
CB 1/4 3/16 K-617 OB 1/2 13/32 K-636
IB 1/4 7/32 K-618 CB 1/2 7/16 K-637
IB 1/4 15/64 K-619 IB 1/2 15/32 K-638
        IB 1/2 31/64 K-639

Standard height: .937, Other sizes available on request. High carbon tool steel vacuum hardened.