Diecutting Punches – Feed-Thru

Standard Feed-Thru

Feed-Thru punches are made from seamless tubing and widely used by felt, leather, and gasket manufacturers.

The inside diameter is relieved from the back to give wide inside clearance, allowing pills to clear smoothly through the base of the punch. This eliminates stripping and permits heavier material to be cut.

 

 

Base
Size
Cut Edge T/XT Stock # Base
Size
Cut Edge T/XT Stock # Base
Size
Cut Edge T/XT Stock #
3/16 3/32 K-200 1/2 27/64 T KT-226 13/16 3/4 XT QUOTE
3/16 7/64 T KT-201 1/2 7/16 XT KE-227 7/8 3/4 K-247
3/16 1/8 XT KE-202 9/16 7/16 K-228 7/8 49/64 K-248
1/4 1/8 K-203 9/16 29/64 K-229 7/8 25/32 K-249
1/4 9/64 K-204 9/16 15/32 K-230 7/8 51/64 T QUOTE
1/4 5/32 K-205 9/16 31/64 T KT-231 7/8 13/16 XT QUOTE
1/4 11/64 T KT-206 9/16 1/2 XT KE-232 15/16 13/16 K-250
1/4 3/16 XT KE-207 5/8 1/2 K-233 15/16 53/64 K-251
5/16 3/16 K-208 5/8 33/64 K-234 15/16 27/32 K-252
5/16 13/64 K-209 5/8 17/32 K-235 15/16 55/64 T QUOTE
5/16 7/32 KT-210 5/8 35/64 T KT-236 15/16 7/8 XT QUOTE
5/16 15/64 T KT-211 5/8 9/16 XT QUOTE 1 7/8 K-253
5/16 1/4 XT KE-212 11/16 9/16 K-237 1 57/64 K-254
3/8 1/4 K-213 11/16 37/64 K-238 1 29/32 K-255
3/8 17/64 K-214 11/16 19/32 K-239 1 59/64 T QUOTE
3/8 9/32 K-215 11/16 39/64 T KT-240 1 15/16 XT QUOTE
3/8 19/64 T KT-216 11/16 5/8 XT QUOTE 1-1/16 15/16 K-256
3/8 5/16 XT KE-217 3/4 5/8 K-241 1-1/16 61/64 K-257
7/16 5/16 K-218 3/4 41/64 K-242 1-1/16 31/32 K-258
7/16 21/64 K-219 3/4 21/32 K-243 1-1/16 63/64 T QUOTE
7/16 11/32 K-220 3/4 43/64 T QUOTE 1-1/16 1 XT QUOTE
7/16 23/64 T KT-221 3/4 11/16 XT QUOTE 1-1/8 1 K-259
7/16 3/8 XT KE-222 13/16 11/16 K-244 1-1/8 1-1/64 K-260
1/2 3/8 K-223 13/16 45/64 K-245 1-1/8 1-1/32 K-261
1/2 25/64 K-224 13/16 23/32 K-246 1-1/8 1-3/64 T QUOTE
1/2 13/32 K-225 13/16 47/64 T QUOTE 1-1/8 1-1/16 XT QUOTE

“T” indicates Thin Wall, “XT” indicates Extra Thinwall. “QUOTE” indicates special sizes quoted on request.

 

Minature High Carbon Tool Steel

Base Size Cut Edge Stock # Base Size Cut Edge Stock #
3/16 1/16 K-262 3/16 1/32 K-265
3/16 5/64 K-263 3/16 3/64 K-266
1/8 1/16 K-264 1/8 1/32 K-267
1/8 3/64 K-268

 

Oversize Feed-Thru

Base Size Cut Edge Stock # Base Size Cut Edge Stock #
1-3/16 1-1/16 K-300 1-3/8 1-1/4 K-306
1-3/16 1-3/32 K-301 1-3/8 1-9/32 K-307
1-1/4 1-1/8 K-302 1-7/16 1-5/16 K-308
1-1/4 1-5/32 K-303 1-7/16 1-11/32 K-309
1-5/16 1-3/16 K-304 1-1/2 1-3/8 K-310
1-5/16 1-7/32 K-305 1-1/2 1-13/32 K-311

Standard Height: .937. Additional heights available: 1-1/8″, 1-1/4″, 1-1/2″, and 2″. Special hole sizes, heights, tube sizes and bevels. Also available for abrasive materials. Other sizes available on request. Case hardened by vacuum carbonitriding.

 

 

The Ultimate concept in Feed-Thru Punches!
AmeriKen’s exclusive KUTS-ALL line is unmatched in the industry.

The KUTS-ALL was developed to cut specialty items in the abrasives industry or to cut any material, such as adhesives, which is hard-to-feed. Special angles have been engineered on the exterior and interior bevels which “grab the waste”, resulting in a punch that cuts longer, grabs better, and sets up faster! Results are outstanding.

♦ Available in diameters of 3/16″ and larger.

 

Heavy Duty Feed-Thru

When it comes to punching extra thick, tough materials, these special feed-thru punches are a cut above the standard line. They make easy work of cutting through rubber, plastic, plywood, chipboard – and will even “stack cut” materials up to 1/4″. Whenever you feel you may have a job in which a standard feed-thru punch may be too light, rely on these specials to do the trick. They are manufactured to precision tolerance from high carbon tool steel for extra long life. They cut sharp and stay sharp…assuring you increased production and less down time than any other punches on the market today.

Standard Heavy Duty Feed-Thru

 

Base Size Cut Edge Stock # Base Size Cut Edge Stock #
3/16 3/32 KHD-200 5/8 1/2 KHD-233
3/16 7/64 KHD-201 5/8 33/64 KHD-234
1/4 1/8 KHD-203 5/8 17/32 KHD-235
1/4 9/64 KHD-204 5/8 35/64 KHD-236
1/4 5/32 KHD-205 11/16 9/16 KHD-237
1/4 11/64 KHD-206 11/16 37/64 KHD-238
5/16 3/16 KHD-208 11/16 19/32 KHD-239
5/16 13/64 KHD-209 11/16 39/64 KHD-240
5/16 7/32 KHD-210 3/4 5/8 KHD-241
5/16 15/64 KHD-211 3/4 41/64 KHD-242
3/8 1/4 KHD-213 3/4 21/32 KHD-243
3/8 17/64 KHD-214 13/16 11/16 KHD-244
3/8 9/32 KHD-215 13/16 45/64 KHD-245
3/8 19/64 KHD-216 13/16 23/32 KHD-246
7/16 5/16 KHD-218 7/8 3/4 KHD-247
7/16 21/64 KHD-219 7/8 49/64 KHD-248
7/16 11/32 KHD-220 7/8 25/32 KHD-249
7/16 23/64 KHD-221 15/16 13/16 KHD-250
1/2 3/8 KHD-223 15/16 53/64 KHD-251
1/2 25/64 KHD-224 15/16 27/32 KHD-252
1/2 13/32 KHD-225 1 7/8 KHD-253
1/2 27/64 KHD-226 1 57/64 KHD-254
9/16 7/16 KHD-228 1 29/32 KHD-255
9/16 29/64 KHD-229 1-1/16 15/16 KHD-256
9/16 15/32 KHD-230 1-1/16 61/64 KHD-257
9/16 31/64 KHD-231 1-1/16 31/32 KHD-258

Miniature Heavy Duty Feed-Thru

Base Size Cut Edge Stock # Base Size Cut Edge Stock #
3/16 1/16 KHD-262 3/16 1/32 KHD-265
3/16 5/64 KHD-263 3/16 3/64 KHD-266
1/8 1/16 KHD-264 1/8 1/32 KHD-267
1/8 3/64 KHD-268

Oversize Heavy Duty Feed-Thru

Base Size Cut Edge Stock # Base Size Cut Edge Stock #
1-3/16 1-1/16 KHD-300 1-3/8 1-1/4 KHD-306
1-3/16 1-3/32 KHD-301 1-3/8 1-9/32 KHD-307
1-1/4 1-1/8 KHD-302 1-7/16 1-5/16 KHD-308
1-1/4 1-5/32 KHD-303 1-7/16 1-11/32 KHD-309
1-5/16 1-3/16 KHD-304 1-1/2 1-3/8 KHD-310
1-5/16 1-7/32 KHD-305 1-1/2 1-13/32 KHD-311

Standard Height: .937, (± .001 Tolerance). High carbon tool steel vacuum hardened.

 

Oval Feed-Thru

These economical oval shaped punches are engineered from our standard feed-thru line, ensuring stripping. Oval Feed-Thru punches do not have full radius ends. If a full radius is required, specify a custom-made AmeriKen punch.

 

Cut Edge Stock # Cut Edge Stock #
1/8 x 3/16 KOFT-0812 5/16 x 1/2 KOFT-2032
1/8 x 1/4 KOFT-0816 5/16 x 9/16 KOFT-2036
5/32 x 1/4 KOFT-1016 5/16 x 5/8 KOFT-2040
5/32×5/16 KOFT-1020 11/32 x 1/2 KOFT-2232
3/16 x 1/4 KOFT-1216 11/32 x 9/16 KOFT-2236
3/16 x 5/16 KOFT-1220 11/32 x 5/8 KOFT-2240
3/16 x 3/8 KOFT-1224 3/8 x 1/2 KOFT-2432
3/16 x 7/16 KOFT-1228 3/8 x 9/16 KOFT-2436
3/16 x 1/2 KOFT-1232 3/8 x 5/8 KOFT-2440
7/32 x 3/8 KOFT-1424 3/8 x 3/4 KOFT-2448
7/32 x 7/16 KOFT-1428 7/16 x 5/8 KOFT-2840
7/32 x 1/2 KOFT-1432 7/16 x 3/4 KOFT-2848
1/4 x 5/16 KOFT-1620 1/2 x 5/8 KOFT-3240
1/4 x 3/8 KOFT-1624 1/2 x 3/4 KOFT-3248
1/4 x 7/16 KOFT-1628 1/2 x 7/8 KOFT-3256
1/4 x 1/2 KOFT-1632 1/2 x 1 KOFT-3264
1/4 x 9/16 KOFT-1636 9/16 x 3/4 KOFT-3648
1/4 x 5/8 KOFT-1640 9/16 x 1 KOFT-3664
9/32 x 1/2 KOFT-1832 5/8 x 1 KOFT-4064
9/32 x 9/16 KOFT-1836 5/8 x 1-1/4 KOFT-4080
9/32 x 5/8 KOFT-1840

Standard Height: .937. Other sizes available on request. Also available in Heavy Wall. Case hardened by vacuum carbonitriding.