Sandvi steel rulek

Specialty Cutting Rule

Bendex

2pt rule available with either shaved or ground precision edge. Has outstanding flexibility and durability. Takes a #2 die bend.

Helmex

2pt rule available with either shaved or ground precision edge. Takes a #X-3 die bend. Its hard 44Rc body with soft outer layer gives this rule inherent bendability and durability.

Duredge

Has a shaved, hardened 56-58 Rc edge on a medium hard body. Assures long wear resistance and excellent bendability. Ideal for folding carton use, or wherever tight radius bends are needed.

Nataloy

An extraordinary alloy steel that produces rule of greater toughness which combines the bendability of a medium hard rule with the strength of a #70 rule. Nataloy is available in most National cutting rules.

Edge Hardened

Many National cutting rules are available edge hardened or can be ordered edged hardened in days.

Self-Leveling

Shortens make-ready time.

Rotary

National offers the most complete line of rotary rules in the industry and can make many specials in a matter of days.

Micro Perf

Available in 30, 50, 60, and 70 TPI. Also available in any custom tooth and tie configuration., Heights from 1/2" to 4" n 2pt or 3pt

Perf Rules

Available in any custom tooth and tie configuration. Heights from 1/4" to 4" in 2pt or 3pt, center bevel or side bevel. Custom orders can be produced in a matter of days.

High Die

3pt and 4pt available in heights from 1/4" to 4". 2pt rule is available up to 2" high

Metal Blanking Rule

Rule is available in soft annealed steel or hard in 4, or 6pt. omes in 11 degree or 45 degree flus side bevel.

Sandvik Dieflex

Has a shaved, hardened 56-58 Rc edge on a medium hard body. Assures long wear resistance and excellent bendability. Ideal for folding carton use, or wherever tight radius bends are needed.

Sandvik Dieflex Hard

Similar to Dieflex, but with a harder 42-44 Rc body. Ideal for cylinder presses, or whenever press operators are "tough" on dies.

Sandvik Dieflex 42

Ideal for dust-free cutting of recycled stock. Similar to Dieflex, but has a slimmer cutting edge with 42 degree bevel which requires less cutting pressure and therefore results in less fiber breakage and less dust.

Sandvik Ultra

Ideal for use on recycled stock and for long folding carton runs. Similar to Dieflex 42, with the addition of a Bonded Edge Coating. The coating protects and lubricates the 58 Rc edge, adding even longer die life.

Sandvik XD 700

Ideal for gasket cutting and for non-asbestos material. Similar to Dieflex, except it has a harder body and an edge hardness of 60 Rc with a 42 degree bevel.

Sandvik Vertex

Excellent overall rule. Capable of extreme bends. Has a tough, uniform 44 Rc body with soft bendable outer skin plus a sharp shaved edge.

Sandvik "G-R"

Precision ground, super sharp hardened 58 Rc edge. Extremely accurate to +/-.0004. Ideal for cutting labels, coated paperboard, plastics and synthetic material.

Sandvik Label Rule

Same as "G-R" except it is available in millimeter heights from 7mm to 12mm.

 

J-1 Super Blade

Precision ground rule with superior bendability and long-lasting durability. Edge hardened to 59 Rc. Holds extremely tight tolerances +/-.0004. Rule was developed to be used with automated bending systems. Available in standard 60 degree bevel, 42 degree bevel for recycled paperboard, and 30 degree bevel for labels, plastics, and materials that have elasticity - and wherever extreme sharpness is required.

Super Blade

Precision ground rule that is edge hardened to 59 Rc on a medium hard body with a soft outer layer to assure long wear and excellent bendability. This is an all-purpose rule for general die use.

Seal Cutting (Label Rule)

Precision ground rule. Edge hardened to 53 Rc on a bendable body. Available in 12mm and 8mm heights. Extremely sharp cutting edge.

Special Rule Coatings Available

Teflon

Creates a smooth, slick surface which prevents hard-to-eject material from sticking - also eliminates dust when cutting recycled paperboard.